SKF PFD 35 TR bearing units

Sealed Speed Rating n3:7500 rpm; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:30500 N; Grease Speed Rating n1:7500 rpm; Oil Speed Rating n2:10000 rpm; D:62.0000 mm; Accessories:No Shield, no Seal; d:25.000 mm; B:25.40 mm; Basic Dynamic Radial Load Rating C:34100 N;

Mass bearing:34 kg; D:340 mm; B:92 mm; r1,2 min.:4 mm; Basic static load rating C0:1730 kN; s1 max.:22.5 mm; Fatigue load limit Pu:153 kN; Limiting speed:2400 r/min; Ca min.:1.6 mm; ra max.:3 mm;

R1:120.65 mm; P180°:160 kN; RG:1 NPT; Taconite seal:TER 166; Eye bolt:2 x 1/2-13 UNC; H1:200.025 mm; ba:80.169 mm; R2:42.069 mm; Max. speed for Taconite seal:385 r/min; A2:339.725 mm;

Basic Dynamic Radial Load Rating C:22900 N; Accessories:No Shield, no Seal; Basic Static Radial Load Rating Co:21200 N; Oil Speed Rating n2:11000 rpm; B:20.60 mm; d:25.000 mm; Sealed Speed Rating n3:8000 rpm; D:52.0000 mm; Grease Speed Rating n1:8000 rpm; Fillet Radius ra:1.00 mm;

Calculation factor Y0:0.8; Reference speed:3600 r/min; Ca min.:6 mm; a:32.421 mm; B:41.275 mm; db min.:100 mm; Calculation factor Y:1.5; d:85.725 mm; da max.:96 mm; d1 ≈:113.52 mm;

rb max.:1 mm; da min.:273 mm; Material constant KM:330; Da min.:321.5 mm; B:150 mm; Specific static load factor K0:500 N/mm²; r2 min.:1.1 mm; C:110 mm; Lubricant:Regular relubricatio; r1 min.:1.1 mm;

Lock washer:W 11; d3 max.:75.54 mm; Hydraulic nut:HMVC 11E; Threads per inch:18; Sleeve:S 111x2; d1:50.8 mm; B:12.954 mm; Lock nut:N 11; B1:63.652 mm; B4:14.3 mm;

Da:215.001 mm; Cap bolt:5/8-11 UNC; P180°:107 kN; h:46.831 mm; A1:120.65 mm; P150°:87.2 kN; Adapter sleeve assembly:SNW 24x4.1/4; Cap bolt, SAE grade:8; R1:79.375 mm; Bearing limiting speed:3800 r/min;

d:40.000 mm; Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:31900 N; B:23.00 mm; D:80.0000 mm; Basic Static Radial Load Rating Co:10000 N; Oil Speed Rating n2:9000 rpm; Grease Speed Rating n1:7500 rpm;

T:54.2 mm; J6:120.5 mm; H:178.5 mm; Basic dynamic load rating C:33.2 kN; A:39 mm; Housing:FYTB 509 M/VZ033; R1:24.5 mm; d:42.862 mm; Thread grub screw G2:5/16-24 UNF; Recommended tightening torque for grub screw:6.5 N·m;

Coefficient of friction µ min.:0.05; Specific dynamic load factor K:10 N/mm²; Mass bushing:0.009 kg; D:20 mm; Coefficient of friction µ max.:0.1; Permissible sliding velocity v max.:5 m/s; Tolerance housing:H7; Specific static load factor K0:20 N/mm²; B:10 mm; Tolerance shaft:h

H2:75 mm; Cap bolt, rec. tightening torque:350 N·m; Locating ring:2 x FRB 10/300; Bearing (basic designation):23136 K; J:450 mm; A:235 mm; Cap bolt, size:M 24x140; P180°:950 kN; N:34 mm; Pa:620 kN;

D:30 mm; Fatigue load limit Pu:1.86 kN; ra max.:0.3 mm; da:25.6 mm; r1,2 min.:0.3 mm; Db:22.4 mm; Reference speed:18000 r/min; B:13 mm; E:26 mm; Basic dynamic load rating C:10.1 kN;

H2:17 mm; J max.:127 mm; J7:14 mm; H:82 mm; Fatigue load limit Pu:0.475 kN; Recommended diameter for attachment bolts, inch G:0.5 in; Bearing:YARAG 206-103; Recommended tightening torque for grub screw:4 N·m; Mass bearing unit:1.05 kg; J6:140 mm;

d:65.000 mm; Accessories:One Seal; Fillet Radius ra:2.00 mm; Oil Speed Rating Open/Shielded n2:5300 rpm; Basic Static Radial Load Rating Co:78000 N; Grease Speed Rating Open/Shielded n1:4500 rpm; Sealed Speed Rating n3:2900 rpm; Basic Dynamic Radial Load Rating C:119000 N; D:160.0000 mm; B:37.00 mm;